Recliner Fabric Loveseat by Elran

• Wall system, must be 5,5" from the wall to fully recline.
• 2 recliners

• Superior construction grade spruce plywood which is dried better and doesn’t warp or crack.
• We combine materials and make choices according to the application to ensure strength and durability of the furniture. The wood pieces systematically interlock during the assembly process which creates a strong, reinforced structure.
• In the areas of the frame that need to withstand more pressure, we use TimberStrand®. It’s an engineered wood currently used to make “H” beams in houses because of its strength. Doesn’t change with variations in humidity and temperature.
• Our frames have a “L” shaped piece that joints the back of the arm to the seat. This piece stops the pivot point on that joint and reinforces the frame.

• High quality foam (Density = 2.05 lb/ft³). The competition uses foams that vary from 1.5 to 1.9 lb/ft³.
• The compression of the foam is the equivalent of flexibility and comfort (33-38 lb/in²) average 36 lb/in².
• Our foam is pre-crushed which allows it to have better comfort upon reception of the furniture.
• We use high quality No Sag springs with a metal rod linking all of them for better weight distribution.
• Felt is installed between the springs and the foam to lengthen their life expectancy.

All the backs of our reclining furniture are removable for better mobility.

• Exclusivity on the design of the mechanism.
• The constant evolution of the design of the mechanism to enhance performance, fluidity and function.
• Manufactured in the United States, we invest a little more money to get a thicker grade of metal, therefore a better quality and durability for our mechanism.
• The usage of self-tapping screws reduces the risk of loose connections because they actually bite into the metal.

• Direct drive action.
• Equal weight distribution, because both sides of the mechanism work simultaneously.
• The other advantage of the external handle is the assistance to close the footrest.
• External versus internal handle = only a question of design.
• Introduction of a new internal handle: Easier to use and more resistant.