|Other Colours Available||Yes|
|Other Mechanisms Available||Yes|
|Other Upholstery/Finishes Available||Yes|
Rocking reclining armchair with a wide variety of choices of fabrics and leathers
- Wall system, must be 5,5" from the wall to fully recline
- Lever style handle to activate reclining mechanism.
- .Easy to install.
- The swivel base allows the chair to rotate 360 degrees or 160 degrees for our motorized recliners.
- Swivel base available on most of our rocker recliners with an extra cost.
- Superior construction grade spruce plywood which is dried better and doesn’t warp or crack.
- We combine materials and make choices according to the application to ensure strength and durability of the furniture. The wood pieces systematically interlock during the assembly process which creates a strong, reinforced structure.
- In the areas of the frame that need to withstand more pressure, we use TimberStrand®. It’s an engineered wood currently used to make “H” beams in houses because of its strength. Doesn’t change with variations in humidity and temperature.
- Our frames have a “L” shaped piece that joints the back of the arm to the seat. This piece stops the pivot point on that joint and reinforces the frame.
- High quality foam (Density = 2.05 lb/ft3). The competition uses foams that vary from 1.5 to 1.9 lb/ft3.
- The compression of the foam is the equivalent of flexibility and comfort (33-38 lb/in2) average 36 lb/in2.
- Our foam is pre-crushed which allows it to have better comfort upon reception of the furniture.
- We use high quality No Sag springs with a metal rod linking all of them for better weight distribution.
- Felt is installed between the springs and the foam to lengthen their life expectancy.
All the backs of our reclining furniture are removable for better mobility.
- Exclusivity on the design of the mechanism.
- The constant evolution of the design of the mechanism to enhance performance, fluidity and function.
- Manufactured in the United States, we invest a little more money to get a thicker grade of metal, therefore a better quality and durability for our mechanism.
- The usage of self-tapping screws reduces the risk of loose connections because they actually bite into the metal.
- Direct drive action.
- Equal weight distribution, because both sides of the mechanism work simultaneously.
- The other advantage of the external handle is the assistance to close the footrest.
- External versus internal handle = only a question of design.
- Introduction of a new internal handle: Easier to use and more resistant.
Despite our best efforts, errors may appear in the product details. In this case, pricing and specifications as they appear in store take precedence.
Prices may vary according to the fabrics, finishes and colours.